|
|
|
AS9100 Rev C - Quality Management Systems: Aviation, Space & Defense Organizations
Berck Limited are pleased to announce the award for :
AS9100 Rev C - Quality Management Systems: Aviation, Space & Defense Organizations
Definitions of AS9100 Rev C
The International Aerospace Quality Group (IAQG) released AS9100 Rev C in January of 2009, and with it the Standard broadened it's scope from aerospace to include defense.
AS9100 is the international management system standard for the Aircraft, Space and Defense (AS&D) industry. The standard provides suppliers with a comprehensive quality system for providing safe and reliable products to the aerospace industry. AS 9100 also addresses civil & military aviation requirements
|
|
|
| |
| |
|
|
 |
February Flava Newsletter 2012!
Berck Limited's February Flava of the month are Tracey Birch and Laura Thornton from our very productive Pack and Despatch, these two beauties have been with the company for 2 years, they are responsible for packing Berck Components ready for despatching 'its all in the presentation' with their seal of approval.
Tracey and Laura are a vibrant and lively pair and are always fun to be around, they put a smile on your face as you pass by, we are proud to have them as part of our cracking team!
Valentine Day Facts! Did you know –
In the Middle Ages, young men and women drew names from a bowl to see who would be their Valentine. They would wear this name pinned onto their sleeves for one week for everyone to see. This was the origin of the expression "to wear your heart on your sleeve."
Physicians of the 1800's commonly advised their patients to eat chocolate to calm their pining for lost love.
Girls of medieval times ate bizarre foods on St. Valentine's Day to make them dream of their future spouse.
January was a very busy month and February and beyond seen to be heading the same way, again we have been fortunate enough to have been awarded several new projects from new and existing customers. Schedules and forecasts remain steady although some increases would be very welcome. We can assure you that we are monitoring the situation carefully and making sure we keep close contact with our customers. Thank you for your terrific support it is very much appreciated.
|
|
|
| |
| |
|
|
 |
JANUARY 2012 NEWSLETTER
Happy New Year!
I trust everyone had a fantastic Christmas break and hope Santa Claus didn’t disappoint you and if he did I'm sure he will make up for it next December.
2012 looks to be a very exciting and busy year not only have we the Olympics to look forward to but we also have the 'End of the World' to enter into our diaries which according to the Mayans will occur on the 21st of December 2012. That’s an event not to be missed!
On a more cheerful note late last year we were lucky enough to secure projects for new and existing customers. We have been working hard on agreeing manufacturing contracts with several of our biggest customers, their enthusiasm regarding this only goes to prove how delighted they are with our performance. This couldn’t have been possible without your expert assistance and knowledge, so thank you and well done!
All the very best wishes for 2012 and remember as a team we can achieve anything! |
|
|
| |
| |
|
|
 |
Merry Christmas and Happy New Year
Seasonal Greetings to everyone! Its that time of year when we all moan about putting on the pounds while we have a fistful of nuts in one hand and 3 sausage rolls in our other only a few hours after devouring a meal that could satisfy a whole army!
Hopefully by the time you read this all your preparations are done. The cards are written and delivered, the presents are lovingly wrapped and labeled and placed carefully under the tree. Or if you are like me you leave it all until the last shopping day and basically just grab the first item closest to the shop door.
The Directors would like to thank you for all your hard work and support over the last 12 months. We have been extremely busy in securing new projects and thankfully the customer orders and schedules appear to be increasing once again. This year we have taken many orders for new tooling and new projects that wouldn’t have been possible without your expertise, knowledge and patience so please accept our sincere thanks.
Have a very Merry Christmas and a Wonderful New Year. We hope all your wishes come true!
See you in 2012!
|
|
|
| |
| |
|
|
 |
WIRING HARNESSES AND HARNESS COMPONENTS
A cable harness, also known as a wire harness, cable assembly, wiring assembly or wiring loom, is a string of cables and/or wires which transmit informational signals or operating currents (energy). The cables are bound together by clamps, cable ties, cable lacing, sleeves, electrical tape, conduit, a weave of extruded string, or a combination thereof.
Each electric wire in a wiring harness plays a different role, such as taking electric power from power supplies, sending sensor signals, and communicating operational information.
Wiring harnesses are important parts, comparable to nerves or blood vessels in the human body, in supporting the operational foundation of cars or equipment. |
|
|
| |
| |
|
|
 |
'POP BERCK'
Berck Limited was formed in 1947 by entrepreneur Albert 'Pop Berck' who had a life time of experience within our industry.
Since then we have established an enviable reputation as the key supplier to many of our customers. We are confident that our knowledge and experience provides a stable foundation from which we are able to provide a complete service, which goes far and beyond that of the normal pressed component supplier - we offer the complete package. Welcome to the Berck Limited Precision Components website. We are a leading manufacturer of quality metal pressings and metal/plastic sub-assemblies for the world |
|
|
| |
| |
|
|
 |
NEW MACHINE CAPACITY
We are pleased to announce at Berck Limited that we have increased our toolroom capacity with the addition of a Jones & Shipman 1430 Surface Grinder.
The Machinery will enable us to service and manintain larger press tools. |
|
|
| |
| |
|
|
 |
MADE IN THE MIDLANDS
We are now a member of 'Made in the Midlands' a new fresh directory for local businesses to help each other and to create possible business, why not take a look! |
|
|
| |
| |
|
|
 |
Manufacturing Contracts Agreed
We are very pleased to announce our success in securing several Long Term Manufacturing Contracts for one of our largest over-seas customers.
|
|
|
| |
| |
|
|
 |
New Web Site
Berck Limited are proud to announce the launch of their new Website. Please browse through our Metal Stamping and Metal Pressing capabilities and also our bespoke 3 axis and 5 axis CNC machining. |
|
|
| |
| |
|
|
 |
Investing for the future
Investment in the latest technology has been a key component in the success of Berck Limited and today we can proudly announce the addition of 20 CNC machines featuring the latest in EDM, Wire EDM and 3 and 5 Axis CNC machining technologies. We are now able to offer the following services :
- CNC Wire Erosion (WEDM)
- CNC Spark Erosion (EDM)
- CNC EDM hole drilling, EDM hole drilling
- CNC Laser Welding
- 3 and 5 Axis CNC machining |
|
|
| |
| |
|
